Bộ mũi mài hợp kim Ruko 116003TCRO
| Mã sản phẩm: | 116003TCRO |
| Hãng sản xuất: | Ruko |
| Xuất xứ: | Germany |
| Bảo hành: | |
| Trọng lượng: |
Giá bán: liên hệ
Bộ mũi doa hợp kim Ruko 116003TCRO
Sets of tungsten carbide rotary burrs in plastic case
10-piece set of tungsten carbide rotary burrs TiCN
2 x shape A, cylinder (ZYA) without end toothing Ø D1 10,0 / 12,0 mm
2 x shape C, oval (WRC) Ø D1 10,0 / 12,0 mm
2 x shape G, tree (SPG) Ø D1 10,0 / 12,0 mm
2 x shape F, ball nose tree (RBF) Ø D1 10,0 / 12,0 mm
1 x shape M, cone (SKM) Ø D1 12,0 mm
1 x shape D, ball type (KUD) Ø D1 12,0 mm
Sản phẩm tương tự
Mũi mài hợp kim 3mm Procut E30306-6
| Tungsten Carbide Rotary Burrs | |||||||
| Oval - Shape E, TRE, SE | |||||||
| Dimensions - All in mm | |||||||
| d1 | l1 | d2 | l2 | Type | Cut 2 | Cut 6 | Cut 3 |
| 3.0 | 6.0 | 3.0 | 38.0 | Solid | E30306-2 | E30306-6 | E30306-3 |
| 5.0 | 8.0 | 3.0 | 38.0 | Solid | E30508-2 | E30508-6 | - |
| 6.3 | 9.5 | 3.0 | 42.0 | Brazed | E30610-2 | E30610-6 | E30610-3 |
Mũi mài hợp kim 6mm Procut E60610-6
| Tungsten Carbide Rotary Burrs |  |  | |||||
| Oval - Shape E, TRE, SE | |||||||
| 3mm shank | |||||||
| Dimensions - All in mm | Part Numbers | ||||||
| d1 | l1 | d2 | l2 | Type | Cut 2 | Cut 6 | Cut 3 |
| 3.0 | 6.0 | 3.0 | 38.0 | Solid | E30306-2 | E30306-6 | E30306-3 |
| 5.0 | 8.0 | 3.0 | 38.0 | Solid | E30508-2 | E30508-6 | - |
| 6.3 | 9.5 | 3.0 | 42.0 | Brazed | E30610-2 | E30610-6 | E30610-3 |
| 6mm shank | |||||||
| Dimensions - All in mm | Part Numbers | ||||||
| d1 | l1 | d2 | l2 | Type | Cut 2 | Cut 6 | Cut 3 |
| 6.0 | 10.0 | 6.0 | 50.0 | Solid | E60610-2 | E60610-6 | E60610-3 |
| 8.0 | 15.0 | 6.0 | 60.0 | Brazed | E60815-2 | E60815-6 | E60815-3 |
| 9.6 | 16.0 | 6.0 | 60.0 | Brazed | E61015-2 | E61015-6 | E61015-3 |
| 12.7 | 22.0 | 6.0 | 67.0 | Brazed | E61220-2 | E61220-6 | E61220-3 |
| 16.0 | 25.0 | 6.0 | 70.0 | Brazed | E61525-2 | E61525-6 | E61525-3 |
| 19.0 | 25.0 | 6.0 | 70.0 | Brazed | E62025-2 | E62025-6 | E62025-3 |
| 8mm shank | |||||||
| Dimensions - All in mm | Part Numbers | ||||||
| d1 | l1 | d2 | l2 | Type | Cut 2 | Cut 6 | Cut 3 |
| 12.7 | 22.0 | 8.0 | 67.0 | Brazed | E81220-2 | E81220-6 | E81220-3 |
| 16.0 | 25.0 | 8.0 | 70.0 | Brazed | E81525-2 | E81525-6 | E81525-3 |
| 19.0 | 25.0 | 8.0 | 70.0 | Brazed | E82025-2 | E82025-6 | E82025-3 |
Mũi doa hợp kim Procut A
Mũi mài hợp kim Procut
| Tungsten Carbide Rotary Burrs | |||||||
| Cylinder without Endcut | |||||||
| Shape: A, ZYA, SA | |||||||
| 3mm shank | |||||||
| Dimensions - All in mm | Part Numbers | ||||||
| d1 | l1 | d2 | l2 | Type | Cut 2 | Cut 6 | Cut 3 |
| 1.5 | 6.0 | 3.0 | 38.0 | Solid | A31.506-2 | A31.506-6 | - |
| 2.0 | 11.0 | 3.0 | 38.0 | Solid | A30211-2 | A30211-6 | - |
| 2.5 | 12.0 | 3.0 | 38.0 | Solid | A32.512-2 | A32.512-6 | - |
| 3.0 | 14.0 | 3.0 | 38.0 | Solid | A30314-2 | A30314-6 | A30314-3 |
| 5.0 | 12.7 | 3.0 | 38.0 | Solid | A30512-2 | A30512-6 | - |
| 6.3 | 4.7 | 3.0 | 37.0 | Brazed | A30605-2 | A30605-6 | - |
| 6.3 | 12.7 | 3.0 | 45.0 | Brazed | A30612-2 | A30612-6 | A30612-3 |
| 6mm shank | |||||||
| Dimensions - All in mm | Part Numbers | ||||||
| d1 | l1 | d2 | l2 | Type | Cut 2 | Cut 6 | Cut 3 |
| 3.0 | 14.0 | 6.0 | 50.0 | Solid | A60312-2 | A60312-6 | - |
| 4.0 | 14.0 | 6.0 | 50.0 | Solid | A60413-2 | A60413-6 | - |
| 5.0 | 16.0 | 6.0 | 50.0 | Solid | A60516-2 | A60516-6 | - |
| 6.0 | 18.0 | 6.0 | 50.0 | Solid | A60618-2 | A60618-6 | A60618-3 |
| 6.0 | 25.0 | 6.0 | 50.0 | Solid | A60625-2 | A60625-6 | - |
| 8.0 | 19.0 | 6.0 | 64.0 | Brazed | A60820-2 | A60820-6 | A60820-3 |
| 9.6 | 13.5 | 6.0 | 59.0 | Brazed | A61014-2 | A61014-6 | - |
| 9.6 | 19.0 | 6.0 | 64.0 | Brazed | A61020-2 | A61020-6 | A61020-3 |
| 9.6 | 25.0 | 6.0 | 70.0 | Brazed | A61025-2 | A61025-6 | - |
| 11.0 | 25.0 | 6.0 | 70.0 | Brazed | A61125-2 | A61125-6 | - |
| 12.7 | 19.0 | 6.0 | 64.0 | Brazed | A61220-2 | A61220-6 | - |
| 12.7 | 25.0 | 6.0 | 70.0 | Brazed | A61225-2 | A61225-6 | A61225-3 |
| 16.0 | 25.0 | 6.0 | 70.0 | Brazed | A61525-2 | A61525-6 | A61525-3 |
| 19.0 | 25.0 | 6.0 | 70.0 | Brazed | A62025-2 | A62025-6 | A62025-3 |
| 25.0 | 25.0 | 6.0 | 70.0 | Brazed | A62525-2 | A62525-6 | A62525-3 |
| 8mm shank | |||||||
| Dimensions - All in mm | Part Numbers | ||||||
| d1 | l1 | d2 | l2 | Type | Cut 2 | Cut 6 | Cut 3 |
| 12.7 | 25.0 | 8.0 | 70.0 | Brazed | A81225-2 | A81225-6 | A81225-3 |
| 16.0 | 25.0 | 8.0 | 70.0 | Brazed | A81525-2 | A81525-6 | A81525-3 |
| 19.0 | 25.0 | 8.0 | 70.0 | Brazed | A82025-2 | A82025-6 | A82025-3 |
| 25.0 | 25.0 | 8.0 | 70.0 | Brazed | A82525-2 | A82525-6 | A82525-3 |
Mũi doa hợp kim Procut B
Mũi mài hợp kim Procut B
| Tungsten Carbide Rotary Burrs |  |  | |||||
| Cylinder with Endcut | |||||||
| Shape: B, ZYAS, SB | |||||||
| 3mm shank | |||||||
| Dimensions - All in mm | Part Numbers | ||||||
| d1 | l1 | d2 | l2 | Type | Cut 2 | Cut 6 | Cut 3 |
| 1.5 | 6.0 | 3.0 | 38.0 | Solid | B31.506-2 | B31.506-6 | - |
| 2.0 | 11.0 | 3.0 | 38.0 | Solid | B30211-2 | B30211-6 | - |
| 2.5 | 12.0 | 3.0 | 38.0 | Solid | B32.512-2 | B32.512-6 | - |
| 3.0 | 14.0 | 3.0 | 38.0 | Solid | B30314-2 | B30314-6 | B30314-3 |
| 5.0 | 12.7 | 3.0 | 38.0 | Solid | B30512-2 | B30512-6 | - |
| 6.3 | 4.7 | 3.0 | 37.0 | Brazed | B30605-2 | B30605-6 | - |
| 6.3 | 12.7 | 3.0 | 45.0 | Brazed | B30612-2 | B30612-6 | B30612-3 |
| 6mm shank | |||||||
| Dimensions - All in mm | Part Numbers | ||||||
| d1 | l1 | d2 | l2 | Type | Cut 2 | Cut 6 | Cut 3 |
| 3.0 | 14.0 | 6.0 | 50.0 | Solid | B60312-2 | B60312-6 | - |
| 4.0 | 14.0 | 6.0 | 50.0 | Solid | B60413-2 | B60413-6 | - |
| 5.0 | 16.0 | 6.0 | 50.0 | Solid | B60516-2 | B60516-6 | - |
| 6.0 | 18.0 | 6.0 | 50.0 | Solid | B60618-2 | B60618-6 | B60618-3 |
| 6.0 | 25.0 | 6.0 | 50.0 | Solid | B60625-2 | B60625-6 | - |
| 8.0 | 19.0 | 6.0 | 64.0 | Brazed | B60820-2 | B60820-6 | B60820-3 |
| 9.6 | 13.5 | 6.0 | 59.0 | Brazed | B61014-2 | B61014-6 | - |
| 9.6 | 19.0 | 6.0 | 64.0 | Brazed | B61020-2 | B61020-6 | B61020-3 |
| 9.6 | 25.0 | 6.0 | 70.0 | Brazed | B61025-2 | B61025-6 | - |
| 11.0 | 25.0 | 6.0 | 70.0 | Brazed | B61125-2 | B61125-6 | - |
| 12.7 | 19.0 | 6.0 | 64.0 | Brazed | B61220-2 | B61220-6 | - |
| 12.7 | 25.0 | 6.0 | 70.0 | Brazed | B61225-2 | B61225-6 | B61225-3 |
| 16.0 | 25.0 | 6.0 | 70.0 | Brazed | B61525-2 | B61525-6 | B61525-3 |
| 19.0 | 25.0 | 6.0 | 70.0 | Brazed | B62025-2 | B62025-6 | B62025-3 |
| 25.0 | 25.0 | 6.0 | 70.0 | Brazed | B62525-2 | B62525-6 | B62525-3 |
| 8mm shank | |||||||
| Dimensions - All in mm | Part Numbers | ||||||
| d1 | l1 | d2 | l2 | Type | Cut 2 | Cut 6 | Cut 3 |
| 12.7 | 25.0 | 8.0 | 70.0 | Brazed | B81225-2 | B81225-6 | B81225-3 |
| 16.0 | 25.0 | 8.0 | 70.0 | Brazed | B81525-2 | B81525-6 | B81525-3 |
| 19.0 | 25.0 | 8.0 | 70.0 | Brazed | B82025-2 | B82025-6 | B82025-3 |
| 25.0 | 25.0 | 8.0 | 70.0 | Brazed | B82525-2 | B82525-6 | B82525-3 |
Bộ mũi mài hợp kim Ruko 116003
Bộ mũi mài hợp kim 10 cái Ruko 116 003
Sets of tungsten carbide rotary burrs Alu / TC / TiCN in steel case
10-piece set of tungsten carbide rotary burrs TC
2 x shape A, cylinder (ZYA) without end toothing Ø D1 10,0 / 12,0 mm
2 x shape C, oval (WRC) Ø D1 10,0 / 12,0 mm
2 x shape G, tree (SPG) Ø D1 10,0 / 12,0 mm
2 x shape F, ball nose tree (RBF) Ø D1 10,0 / 12,0 mm
1 x shape M, cone (SKM) Ø D1 12,0 mm
1 x shape D, ball type (KUD) Ø D1 12,0 mm
Bộ mũi mài hợp kim Ruko 116003TC
Bộ mũi mài hợp kim 10 cái Ruko 116003TC
Sets of tungsten carbide rotary burrs TiCN in steel case
10-piece set of tungsten carbide rotary burrs TiCN
2 x shape A, cylinder (ZYA) without end toothing Ø D1 10,0 / 12,0 mm
2 x shape C, oval (WRC) Ø D1 10,0 / 12,0 mm
2 x shape G, tree (SPG) Ø D1 10,0 / 12,0 mm
2 x shape F, ball nose tree (RBF) Ø D1 10,0 / 12,0 mm
1 x shape M, cone (SKM) Ø D1 12,0 mm
1 x shape D, ball type (KUD) Ø D1 12,0 mm
Bộ mũi doa hợp kim Ruko 116103A
Bộ mũi doa lỗ hợp kim Ruko 116 103 A
Sets of tungsten carbide rotary burrs Alu in steel case
10-piece set of tungsten carbide rotary burrs ALU
2 x shape A, cylinder (ZYA) with end toothing Ø D1 6,0 / 12,0 mm
2 x shape C, oval (WRC) Ø D1 6,0 / 12,0 mm
2 x shape G, tree (SPG) Ø D1 6,0 / 12,0 mm
2 x shape F, ball nose tree (RBF) Ø D1 6,0 / 12,0 mm
2 x shape D, ball type (KUD) Ø D1 6,0 / 12,0 mm
Bộ mũi mài hợp kim Ruko 116003RO
Bộ mũi mài hợp kim Ruko 116 003 RO
Sets of tungsten carbide rotary burrs in plastic case
10-piece set of tungsten carbide rotary burrs TC
2 x shape A, cylinder (ZYA) without end toothing Ø D1 10,0 / 12,0 mm
2 x shape C, oval (WRC) Ø D1 10,0 / 12,0 mm
2 x shape G, tree (SPG) Ø D1 10,0 / 12,0 mm
2 x shape F, ball nose tree (RBF) Ø D1 10,0 / 12,0 mm
1 x shape M, cone (SKM) Ø D1 12,0 mm
1 x shape D, ball type (KUD) Ø D1 12,0 mm
Mũi doa hợp kim Procut C
Mũi mài hợp kim Procut C
| Tungsten Carbide Rotary Burrs |  |  | |||||
| Ball Nosed Cylinder | |||||||
| Shape: C, WRC, SC | |||||||
| 3mm shank | |||||||
| Dimensions - All in mm | Part Numbers | ||||||
| d1 | l1 | d2 | l2 | Type | Cut 2 | Cut 6 | Cut 3 |
| 2.0 | 11.0 | 3.0 | 38.0 | Solid | C30211-2 | C30211-6 | - |
| 2.5 | 11.0 | 3.0 | 38.0 | Solid | C32.511-2 | C32.511-6 | - |
| 3.0 | 14.0 | 3.0 | 38.0 | Solid | C30312-2 | C30312-6 | C30312-3 |
| 5.0 | 12.7 | 3.0 | 38.0 | Solid | C30512-2 | C30512-6 | - |
| 6.3 | 12.7 | 3.0 | 45.0 | Brazed | C30612-2 | C30612-6 | C30612-3 |
| 6mm shank | |||||||
| Dimensions - All in mm | Part Numbers | ||||||
| d1 | l1 | d2 | l2 | Type | Cut 2 | Cut 6 | Cut 3 |
| 3.0 | 14.0 | 6.0 | 50.0 | Solid | C60312-2 | C60312-6 | - |
| 4.0 | 14.0 | 6.0 | 50.0 | Solid | C60413-2 | C60413-6 | - |
| 5.0 | 16.0 | 6.0 | 50.0 | Solid | C60516-2 | C60516-6 | - |
| 6.0 | 18.0 | 6.0 | 50.0 | Solid | C60618-2 | C60618-6 | C60618-3 |
| 6.0 | 25.0 | 6.0 | 50.0 | Solid | C60625-2 | C60625-6 | - |
| 8.0 | 19.0 | 6.0 | 64.0 | Brazed | C60820-2 | C60820-6 | C60820-3 |
| 9.6 | 19.0 | 6.0 | 64.0 | Brazed | C61020-2 | C61020-6 | C61020-3 |
| 9.6 | 25.0 | 6.0 | 70.0 | Brazed | C61025-2 | C61025-6 | - |
| 11.0 | 25.0 | 6.0 | 70.0 | Brazed | C61125-2 | C61125-6 | - |
| 12.0 | 10.0 | 6.0 | 54.0 | Brazed | C61210-2 | C61210-6 | - |
| 12.7 | 19.0 | 6.0 | 64.0 | Brazed | C61220-2 | C61220-6 | C61220-3 |
| 12.7 | 25.0 | 6.0 | 70.0 | Brazed | C61225-2 | C61225-6 | C61225-3 |
| 16.0 | 25.0 | 6.0 | 70.0 | Brazed | C61525-2 | C61525-6 | C61525-3 |
| 19.0 | 25.0 | 6.0 | 70.0 | Brazed | C62025-2 | C62025-6 | C62025-3 |
| 25.0 | 25.0 | 6.0 | 70.0 | Brazed | C62525-2 | C62525-6 | - |
| 8mm shank | |||||||
| Dimensions - All in mm | Part Numbers | ||||||
| d1 | l1 | d2 | l2 | Type | Cut 2 | Cut 6 | Cut 3 |
| 12.7 | 25.0 | 8.0 | 70.0 | Brazed | C81225-2 | C81225-6 | C81225-3 |
| 16.0 | 25.0 | 8.0 | 70.0 | Brazed | C81525-2 | C81525-6 | C81525-3 |
| 19.0 | 25.0 | 8.0 | 70.0 | Brazed | C82025-2 | C82025-6 | C82025-3 |
| 25.0 | 25.0 | 8.0 | 70.0 | Brazed | C82525-2 | C82525-6 | - |
Mũi mài hợp kim Procut D
Mũi doa hợp kim đầu tròn Procut: series D
ball shape carbide rotary bur
| Tungsten Carbide Rotary Burrs |  |  | |||||
| Ball shape carbide rotary bur | |||||||
| Shape: D, KUD, SD | |||||||
| 3mm shank | |||||||
| Dimensions - All in mm | Part Numbers | ||||||
| d1 | l1 | d2 | l2 | Type | Cut 2 | Cut 6 | Cut 3 |
| 2.0 | 1.8 | 3.0 | 38.0 | Solid | D30202-2 | D30202-6 | - |
| 2.5 | 2.3 | 3.0 | 38.0 | Solid | D32.52.5-2 | D32.52.5-6 | - |
| 3.0 | 2.5 | 3.0 | 38.0 | Solid | D30303-2 | D30303-6 | D30303-3 |
| 4.0 | 3.4 | 3.0 | 38.0 | Solid | D30404-2 | D30404-6 | D30404-3 |
| 5.0 | 4.7 | 3.0 | 38.0 | Solid | D30505-2 | D30505-6 | - |
| 6.3 | 5.0 | 3.0 | 38.0 | Brazed | D30606-2 | D30606-6 | D30606-3 |
| 6mm shank | |||||||
| Dimensions - All in mm | Part Numbers | ||||||
| d1 | l1 | d2 | l2 | Type | Cut 2 | Cut 6 | Cut 3 |
| 3.0 | 2.5 | 6.0 | 50.0 | Solid | D60303-2 | D60303-6 | - |
| 4.0 | 3.0 | 6.0 | 50.0 | Solid | D60404-2 | D60404-6 | - |
| 5.0 | 4.0 | 6.0 | 50.0 | Solid | D60505-2 | D60505-6 | - |
| 6.0 | 4.7 | 6.0 | 50.0 | Solid | D60606-2 | D60606-6 | D60606-3 |
| 8.0 | 6.0 | 6.0 | 52.0 | Brazed | D60808-2 | D60808-6 | D60808-3 |
| 9.6 | 8.0 | 6.0 | 54.0 | Brazed | D61010-2 | D61010-6 | D61010-3 |
| 11.0 | 9.5 | 6.0 | 55.0 | Brazed | D61111-2 | D61111-6 | - |
| 12.7 | 11.0 | 6.0 | 56.0 | Brazed | D61212-2 | D61212-6 | D61212-3 |
| 16.0 | 14.0 | 6.0 | 59.0 | Brazed | D61515-2 | D61515-6 | D61515-3 |
| 19.0 | 16.5 | 6.0 | 62.0 | Brazed | D62020-2 | D62020-6 | D62020-3 |
| 25.0 | 22.0 | 6.0 | 67.0 | Brazed | D62525-2 | D62525-6 | D62525-3 |
| 8mm shank | |||||||
| Dimensions - All in mm | Part Numbers | ||||||
| d1 | l1 | d2 | l2 | Type | Cut 2 | Cut 6 | Cut 3 |
| 12.7 | 11.0 | 8.0 | 56.0 | Brazed | D81212-2 | D81212-6 | D81212-3 |
| 16.0 | 14.0 | 8.0 | 59.0 | Brazed | D81515-2 | D81515-6 | D81515-3 |
| 19.0 | 16.5 | 8.0 | 62.0 | Brazed | D82020-2 | D82020-6 | D82020-3 |
| 25.0 | 22.0 | 8.0 | 67.0 | Brazed | D82525-2 | D82525-6 | D82525-3 |
Mũi doa hợp kim Procut F
Mũi mài hợp kim Procut F
| Tungsten Carbide Rotary Burrs |  |  | |||||
| Ball Nosed Tree | |||||||
| Shape: F, RBF, SF | |||||||
| 3mm shank | |||||||
| Dimensions - All in mm | Part Numbers | ||||||
| d1 | l1 | d2 | l2 | Type | Cut 2 | Cut 6 | Cut 3 |
| 3.0 | 6.0 | 3.0 | 38.0 | Solid | F30306-2 | F30306-6 | - |
| 3.0 | 8.0 | 3.0 | 38.0 | Solid | F30308-2 | F30308-6 | - |
| 3.0 | 14.0 | 3.0 | 38.0 | Solid | F30312-2 | F30312-6 | F30312-3 |
| 5.0 | 12.7 | 3.0 | 38.0 | Solid | F30512-2 | F30512-6 | - |
| 6.3 | 12.7 | 3.0 | 45.0 | Brazed | F30612-2 | F30612-6 | F30612-3 |
| 6mm shank | |||||||
| Dimensions - All in mm | Part Numbers | ||||||
| d1 | l1 | d2 | l2 | Type | Cut 2 | Cut 6 | Cut 3 |
| 6.0 | 18.0 | 6.0 | 50.0 | Solid | F60618-2 | F60618-6 | F60618-3 |
| 8.0 | 20.0 | 6.0 | 65.0 | Brazed | F60820-2 | F60820-6 | F60820-3 |
| 9.6 | 19.0 | 6.0 | 64.0 | Brazed | F61020-2 | F61020-6 | F61020-3 |
| 11.0 | 25.0 | 6.0 | 70.0 | Brazed | F61125-2 | F61125-6 | - |
| 12.7 | 19.0 | 6.0 | 64.0 | Brazed | F61220-2 | F61220-6 | - |
| 12.7 | 25.0 | 6.0 | 70.0 | Brazed | F61225-2 | F61225-6 | F61225-3 |
| 16.0 | 25.0 | 6.0 | 70.0 | Brazed | F61525-2 | F61525-6 | F61525-3 |
| 16.0 | 30.0 | 6.0 | 75.0 | Brazed | F61530-2 | F61530-6 | - |
| 19.0 | 25.0 | 6.0 | 70.0 | Brazed | F62025-2 | F62025-6 | F62025-3 |
| 19.0 | 32.0 | 6.0 | 77.0 | Brazed | F62032-2 | F62032-6 | F62032-3 |
| 19.0 | 38.0 | 6.0 | 83.0 | Brazed | F62038-2 | F62038-6 | F62038-3 |
| 8mm shank | |||||||
| Dimensions - All in mm | Part Numbers | ||||||
| d1 | l1 | d2 | l2 | Type | Cut 2 | Cut 6 | Cut 3 |
| 12.7 | 25.0 | 8.0 | 70.0 | Brazed | F81225-2 | F81225-6 | F81225-3 |
| 16.0 | 25.0 | 8.0 | 70.0 | Brazed | F81525-2 | F81525-6 | F81525-3 |
| 19.0 | 25.0 | 8.0 | 70.0 | Brazed | F82025-2 | F82025-6 | F82025-3 |
| 19.0 | 32.0 | 8.0 | 77.0 | Brazed | F82032-2 | F82032-6 | F82032-3 |
| 19.0 | 38.0 | 8.0 | 83.0 | Brazed | F82038-2 | F82038-6 | F82038-3 |
Mũi doa lỗ hợp kim Procut G
Mũi doa lỗ hợp kim Procut G
| Tungsten Carbide Rotary Burrs |  |  | |||||
| Pointed Tree | |||||||
| Shape: G, SPG, SG | |||||||
| 3mm shank | |||||||
| Dimensions - All in mm | Part Numbers | ||||||
| d1 | l1 | d2 | l2 | Type | Cut 2 | Cut 6 | Cut 3 |
| 3.0 | 6.0 | 3.0 | 38.0 | Solid | G30306-6 | F30306-6 | - |
| 3.0 | 10.0 | 3.0 | 38.0 | Solid | G30310-6 | F30308-6 | - |
| 3.0 | 14.0 | 3.0 | 38.0 | Solid | G30312-6 | F30312-6 | G30312-3 |
| 5.0 | 12.7 | 3.0 | 38.0 | Solid | G30512-6 | F30512-6 | - |
| 6.3 | 12.7 | 3.0 | 45.0 | Brazed | G30612-6 | F30612-6 | G30612-3 |
| 6mm shank | |||||||
| Dimensions - All in mm | Part Numbers | ||||||
| d1 | l1 | d2 | l2 | Type | Cut 2 | Cut 6 | Cut 3 |
| 6.0 | 18.0 | 6.0 | 50.0 | Solid | G60618-2 | G60618-6 | G60618-3 |
| 8.0 | 19.0 | 6.0 | 64.0 | Brazed | G60820-2 | G60820-6 | G60820-3 |
| 9.6 | 19.0 | 6.0 | 64.0 | Brazed | G61020-2 | G61020-6 | G61020-3 |
| 12.7 | 19.0 | 6.0 | 64.0 | Brazed | G61220-2 | G61220-6 | - |
| 12.7 | 25.0 | 6.0 | 70.0 | Brazed | G61225-2 | G61225-6 | G61225-3 |
| 12.7 | 30.0 | 6.0 | 75.0 | Brazed | G61230-2 | G61230-6 | - |
| 16.0 | 25.0 | 6.0 | 70.0 | Brazed | G61525-2 | G61525-6 | G61525-3 |
| 16.0 | 30.0 | 6.0 | 75.0 | Brazed | G61530-2 | G61530-6 | - |
| 19.0 | 25.0 | 6.0 | 70.0 | Brazed | G62025-2 | G62025-6 | - |
| 19.0 | 38.0 | 6.0 | 83.0 | Brazed | G62038-2 | G62038-6 | - |
| 8mm shank | |||||||
| Dimensions - All in mm | Part Numbers | ||||||
| d1 | l1 | d2 | l2 | Type | Cut 2 | Cut 6 | Cut 3 |
| 12.7 | 25.0 | 8.0 | 70.0 | Brazed | G81225-2 | G81225-6 | G81225-3 |
| 12.7 | 30.0 | 8.0 | 75.0 | Brazed | G81230-2 | G81230-6 | - |
| 16.0 | 25.0 | 8.0 | 70.0 | Brazed | G81525-2 | G81525-6 | G81525-3 |
| 16.0 | 30.0 | 8.0 | 75.0 | Brazed | G81530-2 | G81530-6 | - |
| 19.0 | 25.0 | 8.0 | 70.0 | Brazed | G82025-2 | G82025-6 | - |
| 19.0 | 38.0 | 8.0 | 83.0 | Brazed | G82038-2 | G82038-6 | - |
Mũi doa lỗ hợp kim Procut H
Mũi doa lỗ hợp kim Procut series: H
| Tungsten Carbide Rotary Burrs |  |  | |||||
| Flame | |||||||
| Shape: H, SH | |||||||
| 3mm shank | |||||||
| Dimensions - All in mm | Part Numbers | ||||||
| d1 | l1 | d2 | l2 | Type | Cut 2 | Cut 6 | Cut 3 |
| 3.0 | 6.0 | 3.0 | 38.0 | Solid | H30306-2 | H30306-6 | - |
| 5.0 | 9.5 | 3.0 | 38.0 | Solid | H30510-2 | H30510-6 | - |
| 6.0 | 10.0 | 3.0 | 43.0 | Brazed | H30612-2 | H30612-6 | - |
| 6mm shank | |||||||
| Dimensions - All in mm | Part Numbers | ||||||
| d1 | l1 | d2 | l2 | Type | Cut 2 | Cut 6 | Cut 3 |
| 6.0 | 14.0 | 6.0 | 50.0 | Solid | H60614-2 | H60614-6 | - |
| 8.0 | 19.0 | 6.0 | 64.0 | Brazed | H60820-2 | H60820-6 | H60820-3 |
| 9.6 | 19.0 | 6.0 | 65.0 | Brazed | H61020-2 | H61020-6 | H61020-3 |
| 12.7 | 32.0 | 6.0 | 77.0 | Brazed | H61232-2 | H61232-6 | H61232-3 |
| 16.0 | 36.0 | 6.0 | 81.0 | Brazed | H61535-2 | H61535-6 | H61535-3 |
| 19.0 | 41.0 | 6.0 | 86.0 | Brazed | H62042-2 | H62042-6 | - |
| 8mm shank | |||||||
| Dimensions - All in mm | Part Numbers | ||||||
| d1 | l1 | d2 | l2 | Type | Cut 2 | Cut 6 | Cut 3 |
| 12.7 | 32.0 | 8.0 | 77.0 | Brazed | H81232-2 | H81232-6 | - |
| 16.0 | 36.0 | 8.0 | 81.0 | Brazed | H81535-2 | H81535-6 | - |
| 19.0 | 41.0 | 8.0 | 86.0 | Brazed | H82042-2 | H82042-6 | - |
Mũi doa hợp kim 60º độ Procut
Mũi doa hợp kim 60º độ Procut: series J
| Tungsten Carbide Rotary Burrs |  |  | |||||
| 60º Countersink | |||||||
| Shape: J, KSJ, SJ | |||||||
| 3mm shank | |||||||
| Dimensions - All in mm | Part Numbers | ||||||
| d1 | l1 | d2 | l2 | Type | Cut 2 | Cut 6 | Cut 3 |
| 3.0 | 2.5 | 3.0 | 38.0 | Solid | J30303-2 | J30303-6 | - |
| 6mm shank | |||||||
| Dimensions - All in mm | Part Numbers | ||||||
| d1 | l1 | d2 | l2 | Type | Cut 2 | Cut 6 | Cut 3 |
| 6.0 | 4.0 | 6.0 | 50.0 | Solid | J60606-2 | J60606-6 | - |
| 9.6 | 8.0 | 6.0 | 56.0 | Brazed | J61008-2 | J61008-6 | - |
| 12.7 | 11.0 | 6.0 | 59.0 | Brazed | J61210-2 | J61210-6 | - |
| 16.0 | 14.5 | 6.0 | 63.0 | Brazed | J61512-2 | J61512-6 | - |
| 19.0 | 17.5 | 6.0 | 65.0 | Brazed | J62018-2 | J62018-6 | - |
| 25.0 | 24.5 | 6.0 | 70.0 | Brazed | J62520-2 | J62520-6 | - |
| 8mm shank | |||||||
| Dimensions - All in mm | Part Numbers | ||||||
| d1 | l1 | d2 | l2 | Type | Cut 2 | Cut 6 | Cut 3 |
| 12.7 | 11.0 | 8.0 | 59.0 | Brazed | J81210-2 | J81210-6 | - |
| 16.0 | 14.5 | 8.0 | 63.0 | Brazed | J81512-2 | J81512-6 | - |
| 19.0 | 17.5 | 8.0 | 65.0 | Brazed | J82018-2 | J82018-6 | - |
| 25.0 | 24.5 | 8.0 | 70.0 | Brazed | J82520-2 | J82520-6 | - |
Mũi doa hợp kim 90º độ Procut
Mũi doa hợp kim 90º độ Procut: series K
| Tungsten Carbide Rotary Burrs |  |  | |||||
| 90º Countersink | |||||||
| Shape: K, KSK, SK | |||||||
| 3mm shank | |||||||
| Dimensions - All in mm | Part Numbers | ||||||
| d1 | l1 | d2 | l2 | Type | Cut 2 | Cut 6 | Cut 3 |
| 3.0 | 1.5 | 3.0 | 38.0 | Solid | K30303-2 | K30303-6 | - |
| 6mm shank | |||||||
| Dimensions - All in mm | Part Numbers | ||||||
| d1 | l1 | d2 | l2 | Type | Cut 2 | Cut 6 | Cut 3 |
| 6.0 | 3.0 | 6.0 | 50.0 | Solid | K60603-2 | K60603-6 | - |
| 9.6 | 4.7 | 6.0 | 53.0 | Brazed | K61004-2 | K61004-6 | - |
| 12.7 | 6.3 | 6.0 | 55.0 | Brazed | K61206-2 | K61206-6 | - |
| 16.0 | 8.0 | 6.0 | 57.0 | Brazed | K61508-2 | K61508-6 | - |
| 19.0 | 9.5 | 6.0 | 59.0 | Brazed | K62012-2 | K62012-6 | - |
| 25.0 | 12.7 | 6.0 | 61.0 | Brazed | K62512-2 | K62512-6 | - |
| 8mm shank | |||||||
| Dimensions - All in mm | Part Numbers | ||||||
| d1 | l1 | d2 | l2 | Type | Cut 2 | Cut 6 | Cut 3 |
| 12.7 | 6.3 | 8.0 | 55.0 | Brazed | K81206-2 | K81206-6 | - |
| 16.0 | 8.0 | 8.0 | 57.0 | Brazed | K81508-2 | K81508-6 | - |
| 19.0 | 9.5 | 8.0 | 59.0 | Brazed | K82012-2 | K82012-6 | - |
| 25.0 | 12.7 | 8.0 | 61.0 | Brazed | K82512-2 | K82512-6 | - |
Mũi doa hợp kim Procut L
Mũi doa lỗ hợp kim Procut: series K
| Tungsten Carbide Rotary Burrs |  |  | ||||||
| Ball Nose Cone | ||||||||
| Shape: L, KEL, SL | ||||||||
| 3mm shank | ||||||||
| Dimensions - All in mm | Part Numbers | |||||||
| d1 | l1 | d2 | l2 | Type | Angle | Cut 2 | Cut 6 | Cut 3 |
| 3.0 | 10 | 3.0 | 38 | Solid | 10º | L30310-2 | L30310-6 | - |
| 3.0 | 14 | 3.0 | 38 | Solid | 8º | L30312-2 | L30312-6 | L30312-3 |
| 5.0 | 12.7 | 3.0 | 38 | Solid | 14º | L30512-2 | L30512-6 | - |
| 6.3 | 15.8 | 3.0 | 48.0 | Brazed | 22º | L30612-2 | L30612-6 | L30612-3 |
| 6mm shank | ||||||||
| Dimensions - All in mm | Part Numbers | |||||||
| d1 | l1 | d2 | l2 | Type | Angle | Cut 2 | Cut 6 | Cut 3 |
| 6.0 | 18.0 | 6.0 | 50.0 | Solid | 14º | L60618-2 | L60618-6 | L60618-3 |
| 8.0 | 25.4 | 6.0 | 70.0 | Brazed | 14º | L60822-2 | L60822-6 | L60822-3 |
| 10.0 | 20.0 | 6.0 | 65.0 | Brazed | 14º | L61020-2 | L61020-6 | L61020-3 |
| 9.6 | 30.0 | 6.0 | 76.0 | Brazed | 14º | L61026-2 | L61026-6 | L61026-3 |
| 12.0 | 25.0 | 6.0 | 70.0 | Brazed | 14º | L61225-2 | L61225-6 | - |
| 12.7 | 32.0 | 6.0 | 77.0 | Brazed | 14º | L61228-2 | L61228-6 | L61228-3 |
| 16.0 | 33.0 | 6.0 | 78.0 | Brazed | 14º | L61533-2 | L61533-6 | L61533-3 |
| 19.0 | 41.0 | 6.0 | 86.0 | Brazed | 14º | L62038-2 | L62038-6 | - |
| 8mm shank | ||||||||
| Dimensions - All in mm | Part Numbers | |||||||
| d1 | l1 | d2 | l2 | Type | Angle | Cut 2 | Cut 6 | Cut 3 |
| 12.7 | 32.0 | 8.0 | 77.0 | Brazed | 14º | L81228-2 | L81228-6 | L81228-3 |
| 16.0 | 33.0 | 8.0 | 78.0 | Brazed | 14º | L81533-2 | L81533-6 | L81533-3 |
| 19.0 | 41.0 | 8.0 | 86.0 | Brazed | 14º | L82038-2 | L82038-6 | - |
Mũi doa lỗ hợp kim Procut M
Mũi doa hợp kim Procut: series M
| Tungsten Carbide Rotary Burrs |  |  | ||||||
| Cone | ||||||||
| Shape: M, SKM, SM | ||||||||
| 3mm shank | ||||||||
| Dimensions - All in mm | Part Numbers | |||||||
| d1 | l1 | d2 | l2 | Type | Angle | Cut 2 | Cut 6 | Cut 3 |
| 3 | 8 | 3.0 | 38.0 | Solid | 18º | M30308-2 | M30308-6 | - |
| 3 | 11 | 3.0 | 38.0 | Solid | 14º | M30311-2 | M30311-6 | M30311-3 |
| 3 | 15 | 3.0 | 38.0 | Solid | 10º | M30315-2 | M30315-6 | - |
| 6.3 | 12.7 | 3.0 | 49.0 | Brazed | 22º | M30612-2 | M30612-6 | M30612-3 |
| 6mm shank | ||||||||
| Dimensions - All in mm | Part Numbers | |||||||
| d1 | l1 | d2 | l2 | Type | Angle | Cut 2 | Cut 6 | Cut 3 |
| 6.0 | 12.7 | 6.0 | 50.0 | Solid | 20º | M60612-2 | M60612-6 | - |
| 6.0 | 20.0 | 6.0 | 50.0 | Solid | 14º | M60620-2 | M60620-6 | M60620-3 |
| 6.0 | 25.0 | 6.0 | 50.0 | Solid | 10º | M60625-2 | M60625-6 | - |
| 8.0 | 18.0 | 6.0 | 64.0 | Brazed | 22º | M60818-2 | M60818-6 | - |
| 9.6 | 16.0 | 6.0 | 64.0 | Brazed | 28º | M61020-2 | M61020-6 | M61020-3 |
| 12.7 | 22.0 | 6.0 | 71.0 | Brazed | 28º | M61222-2 | M61222-6 | M61222-3 |
| 16.0 | 25.0 | 6.0 | 71.0 | Brazed | 31º | M61525-2 | M61525-6 | - |
| 8mm shank | ||||||||
| Dimensions - All in mm | Part Numbers | |||||||
| d1 | l1 | d2 | l2 | Type | Angle | Cut 2 | Cut 6 | Cut 3 |
| 12.7 | 22.0 | 8.0 | 71.0 | Brazed | 28º | M81222-2 | M81222-6 | - |
| 16.0 | 25.0 | 8.0 | 71.0 | Brazed | 31º | M81525-2 | M81525-6 | - |
Mũi doa hợp kim Procut N
Mũi doa hợp kim Procut: series N
| Tungsten Carbide Rotary Burrs |  |  | ||||||
| Inverted Cone | ||||||||
| Shape: N, WKN, SN | ||||||||
| 3mm shank | ||||||||
| Dimensions - All in mm | Part Numbers | |||||||
| d1 | l1 | d2 | l2 | Type | Angle | Cut 2 | Cut 6 | Cut 3 |
| 3.0 | 4.0 | 3.0 | 38.0 | Solid | 10º | N30304-2 | N30304-6 | - |
| 3.0 | 4.0 | 3.0 | 38.0 | Solid | 10º | N30304-2E* | N30304-6E* | - |
| 6.3 | 6.0 | 3.0 | 39.0 | Brazed | 12º | N30606-2 | N30606-6 | - |
| 6.3 | 6.4 | 3.0 | 39.0 | Brazed | 12º | N30606-2E* | N30606-6E* | - |
| 6mm shank | ||||||||
| Dimensions - All in mm | Part Numbers | |||||||
| d1 | l1 | d2 | l2 | Type | Angle | Cut 2 | Cut 6 | Cut 3 |
| 6.0 | 8.0 | 6.0 | 50.0 | Solid | 10º | N60606-2 | N60606-6 | - |
| 9.6 | 9.5 | 6.0 | 55.0 | Brazed | 16º | N61010-2 | N61010-6 | - |
| 12.7 | 12.7 | 6.0 | 58.0 | Brazed | 28º | N61212-2 | N61212-6 | - |
| 16.0 | 19.0 | 6.0 | 64.0 | Brazed | 18º | N61520-2 | N61520-6 | - |
| 19.0 | 16.0 | 6.0 | 61.0 | Brazed | 30º | N62015-2 | N62015-6 | - |
| 8mm shank | ||||||||
| Dimensions - All in mm | Part Numbers | |||||||
| d1 | l1 | d2 | l2 | Type | Angle | Cut 2 | Cut 6 | Cut 3 |
| 12.7 | 12.7 | 8.0 | 58.0 | Brazed | 28º | N81212-2 | N81212-6 | - |
| 16.0 | 19.0 | 8.0 | 64.0 | Brazed | 18º | N81520-2 | N81520-6 | - |
| 19.0 | 16.0 | 8.0 | 61.0 | Brazed | 30º | N82015-2 | N82015-6 | - |
Bộ mũi mài hợp kim 35 cái Ruko 116008
Bộ mũi doa hợp kim 35 cái Ruko 116 008
35-piece set of tungsten carbide rotary burrs TC
in a convenient table display
each 1 x Ø D1 6,0 mm + 8,0 mm + 10,0 mm + 12,0 mm + 16,0 mm
5 TC rotary burrs shape A, cylinder (ZYA) with end toothing
5 TC rotary burrs shape A, cylinder (ZYA) without end toothing
5 TC rotary burrs shape C, oval (WRC)
5 TC rotary burrs shape G, tree (SPG)
5 TC rotary burrs shape F, ball nose tree (RBF)
5 TC rotary burrs shape M, cone (SKM)
5 TC rotary burrs shape D, ball type (KUD)
Bộ mũi doa hợp kim 35 cái Ruko 116008TC
Bộ mũi doa lỗ hợp kim 35 cái Ruko 116 008 TC
35-piece set of tungsten carbide rotary burrs TiCN
Bộ mũi doa hợp kim Ruko 116103ARO
Bộ mũi mài hợp kim Ruko 116 103 ARO
10-piece set of tungsten carbide rotary burrs ALU
Bộ mũi mài hợp kim 10 cái Ruko 116002
Bộ mũi doa hợp kim 10 cái Ruko 116 002
Bộ mũi doa hợp kim 3 cái Ruko 116001
Bộ mũi mài hợp kim 3 cái Ruko 116 001
Bộ mũi mài hợp kim 5 cái Ruko 116004
Bộ mũi doa hợp kim 5 cái Ruko 116 004
