Cần xiết chỉnh lực 8-40Nm Stahlwille 50180004
Cần xiết chỉnh lực 8-40Nm Stahlwille 50180004 (đầu 9x12mm)
| code | size |  |  |  | b | h | L | LF | SF |  |
| mm | mm | mm | mm | mm | mm | g |
| 50180002 | 2 | 4-20 N·m | 0,5 N·m |  | 27,5 | 23 | 178,5 | 174 | 17,5 | 315 |
| 50180004 | 4 | 8-40 N·m | 1 N·m | | 27,5 | 23 | 222 | 218 | 17,5 | 395 |
| 50580001 | a/2-1 | 17,5-87,5 in·lb | 2,5 in·lb | | 27,5 | 23 | 178,5 | 174 | 17,5 | 315 |
| 50580002 | a/2 | 30-175 in·lb | 5 in·lb | | 27,5 | 23 | 178,5 | 174 | 17,5 | 315 |
| 50580004 | a/4 | 70-350 in·lb | 10 in·lb | | 27,5 | 23 | 222 | 218 | 17,5 | 395 |
730 - Basic wrenches with tool carrier for insert tools
Service MANOSKOP® 730/2
- click-type
- mount for interchangeable insert/shell tools
- QuickRelease safety lock (sizes 5-65)
- rapid setting (sizes 2-65)
- dual stop signal
- twin scales N·m/ft·lb and N·m/in·lb (sizes 5-80)
- the measuring element is only under load while force is being applied, no need for manual reset to zero
- can be applied for either clockwise or anticlockwise tightening by turning the inserts over
- any force applied to the tool after the 'click' or applied in the opposite direction to the current function - e.g.
- forcible loosening of a jammed screw - does not act on the trigger mechanism and cannot cause damage to it.
- calibration using perfectControl calibrating unit No 7794 or calibration system No 7706. Adjustment without disassembly.
- with certificate
- display deviation value ± 4%
